Description:
Capacity – Bevel/Hypoid Gears
Gear OD (max.) 508 mm
Pinion OD (max.) 300 mm
Pinion offset @ 500mm gear OD
above center 127 mm
below center 51 mm
Pinion offset @ 250mrn gear OD
above center 124 mm
below center 127 mm
Shaft angle (w/o reverse mounting of gear) 85° to 180°
(with reverse mounting of gear) 0° to 180°
Gear spindle nose to pinion ax.is (min.) 51 mm
(max.) 305 mm
Pinion spindle nose to gear ax.is (min.) 394 mm
(max) 394 mm
Capacity - Cylindrical Gears
Center distance (min.) 25 mm
(max) 305 mm
Distance between spindle faces @ b = 0°
(min) 165 mm
(max) 419 mm
MACHINE AXES TRAVELS
Maximum haft angle travel (B-Axis) 85° to 180°
Maximum vertical travel (Y-Axis) -127 mm to 127 mm
Maximum horizontal travel (X-Axis) 140 mm to 394 mm
Sliding base travel (Z-Axis) 51 mm to 305 mm
Machine center to work spindle face (fixed) 114 mm
PINION SPINDLE
Diameter of tapered hole at large end 3 29/64" (#39 taper)
Taper per foot
Depth of taper 3"
Chucking force 4500 to 6000 psi
Spindle speed range - single flank testing (SFT) 15 to 2500 RPM
Spindle speed range - roll testing & SBN 15 to 3000 RPM
SPECIFICATIONS (Cont'd)
GEAR SPINDLE
Diameter of tapered bole at large end 3 29/64" (#39 taper)
Taper per foot 39/64"
Depth of taper 3"
Chucking force 4500 to 6000 psi
Spindle speed range - roll testing & SBN 15 to 1500 RPM
Spindle speed range - single flank testing (SFI) 15 to 1250 RPM
Brake Load - conventional testing 69 Nm
- high torque testing 100 Nm
MISCELLANEOUS
Floor space (length x width) 2991 x 1613 mm
Height (less mist collector) 2305 mm
Weight (approx.) 8200 kg
Electrical Load 16,7 KW (Peak value)
Compressed Air 17m3/hr. (est), 4.9 Bars
Promote your used machinery online, find buyers with us.