Description:

Bed-Type Milling Machine - MTE KT-4700

Travels:

• X-Axis 4500mm
• Z-Axis 1500mm
• Y-Axis 1500mm

Clamping Table:

• Length 4700mm
• Width 1400mm
• Transport load 15000kg

Milling Head:

• Automatic simultaneous milling head, diagonaly swivelling in 2 levels A- und C-Axis
• RPM Area: 0-12000 U/min
• Swiveling Angle C-Axis +/-360° continuous; A-Axis +/-110° continuous
• Swiveling Speed: 360°/s
• Swiveling Moment: 1200 Nm
• Clamping Moment: 4000 Nm
• Taper: HSK 100-A100
• Drive Power Motor Spindle: 34KW
• Torque: 170 Nm
• Speed control: Continuous

Axle Drives:

• Axle Drive Motors: Heidenhain (digital Drives)
• Rapid Traverse: max. 25000mm/min
• Feed Rate: max. 15000mm/min
• Feed Force: 26000N

Clamping Table:

• Amount of T-Nutes: 8
• Size T-Nutes: 22 H12
• Reference Nutes: 22 H7

Space Demand:

• Length: ca. 13000mm
• Width: ca. 5500mm
• Height: ca. 4500mm
• Weight: ca. 39100kg
• Connected Load: ca. 70kvA

Equipment:

• Heidenhain iTNC 530
• Heidenhain Collision Control DCM
• Handwheel Heidenhain HR550FS
• Hydraulic System Bosch Rexroth
• INA Linear Guides
• Automatic Central Lubrication
• Automatic Temperature-Compensation
• Additional Footpedal for manual Tool Change
• Full-Cabine (4 sides) with big viewing window, closed on top
• LED workspace lighting
• Cooling Lubricant System with Inner Spindle Cooling 990 Liter, External Cooling 5 bar, Internal Cooling 20 bar
• Paper Belt Filter System
• OilBand Skimmer with microbe aeration
• Air cooling through Spindle and Luftkühlung durch Spindel und Externally via Coolant Nozzles
• Rinsing Pistol
• Automatic Tool Changer with 60 Tools
• Chip Conveyor Package consisting of 2x longitudal and 1x cross conveyor
• Automatic Front Door
• 3x Toto Clear Units
• Radio Measurement Sensor M&H RWP38.41
• Special Operating Mode 4
• TCP Opt for fully automated zero positioning of Milling Head

Operation Hours:

• Control on: ca. 1865 h
• Machine on: ca. 1575 h
• Spindle on: ca. 185 h