Projects > (7) Modern & Upgraded Complete Forging Lines > C48: Forging Line with Hasenclever VEPES 3150 (YoM: 1972)

C48: Forging Line with Hasenclever VEPES 3150 (YoM: 1972)

Production Line Name:C48: Forging Line with Hasenclever VEPES 3150 (YoM: 1972)
Description:

This complete Forging Line C48 consists of several machines as listed below.
The main specifications of the C48 - Hasenclever VEPES 3150 are as follows:

Forging line C48
Make: Hasenclever
Model: VEPES 3150/1250/305
Machine number: 7429

  • Nominal force: 3150 MP
  • Clear stand width: 1250 mm
  • Table clamping surface
  • Width from left to right: 1235 mm
  • Depth from front to back: 1600 mm
  • Slide clamping surface
  • Width from left to right: 1180 mm
  • Depth from front to back: 1120 mm
  • Clear heights between table and ram
  • Stroke and slide adjustment below: 1026 mm
  • Lift and slide adjustment above: 1355 mm
  • Central height adjustment of the carriage
  • By hand: -
  • Through auxiliary engine and gearbox: 24 mm
  • Adjustment motor
  • Rated capacity: 7,35 kW
  • Speed: 14,5 U/min
  • Slide stroke: 305 mm
  • Number of strokes per minute: 60
  • Drive motor
  • Rated capacity: 150 kW
  • Number of revolutions: 1500 U/min
  • Electrical equipment is designed for:
  • Cycles: 3
  • Volt: 380
  • Tension: 50
  • Required compressed air: 50 atü
  • Total weight: 203 t

Die deutsche Übersetzung finden Sie unten:

Schmiedelinie C48
Hersteller: Hasenclever
Model: VEPES 3150/1250/305
Maschinennummer: 7429

  • Nennkraft: 3150 Mp
  • Lichte Ständerweite: 1250 mm
  • Tischspannfläche
  • Breite von links nach rechts: 1235 mm
  • Tiefe von vorne nach hinten: 1600 mm
  • Schlittenspannfläche
  • Breite von links nach rechts: 1180 mm
  • Tiefe von vorne nach hinten: 1120 mm
  • Lichte Höhen zwischen Tisch und Schlitten
  • Hub und Schlittenverstellung unten: 1026 mm
  • Hub und Schlittenverstellung oben: 1355 mm
  • Zentrale Höhenverstellung des Schlittens
  • Von Hand: -
  • Durch Hilfsmotor und Getriebe: 24 mm
  • Verstellmotor
  • Nennleistung: 7,35 kW
  • Drehzahlt: 14,5 U/min
  • Schlittenhub: 305 mm
  • Hubzahl pro Minute: 60
  • Antriebsmotor
  • Nennleistung: 150 kW
  • Drehzahl: 1500 U/min
  • Elektrische Ausrüstung ist ausgelegt für:
  • Zyklen: 3
  • Volt: 380
  • Spannung: 50 Hz
  • Erforderliche Druckluft: 50 atü
  • Gesamtgewicht: 203 t

Further machines belonging to this forging line are:
2.1. Spiral Conveyor, Make Fröhlich, YoM: 1987
2.2. Induction Furnace, Make AEG Elotherm BTH2/2 405-NC, YoM: 1999
2.3. Trimming Press, Make Weingarten DE2000, 12, YoM: 1975
2.4. Cooling Tower, Make Köbo/Plappert, YoM: 1999
2.5. (5) Robots, Make ABB IRB6620-150/2,2, YoM: 2012

Youtube Video Tour:

Production Line Id:27
Disclaimer:

The presented specifications have been prepared by the best of our knowledge and therefore, we cannot be held liable for any errors or omissions!

Buyers are invited to inspect the offered Machinery & Equipment at current location prior to purchase.

Machines of: C48: Forging Line with Hasenclever VEPES 3150 (YoM: 1972)

Promote your used machinery online, find buyers with us.

Related to: C48: Forging Line with Hasenclever VEPES 3150 (YoM: 1972)

27